SCC2692AE1A44,529 Overview
There is a cost-effective 44-LCC (J-Lead) package available for this product.The transmission of data takes place over 2, DUART channels.For packaging purposes, Tube is used.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.Configuration of this device involves 44 terminations.For its operation, it requires a supply voltage of 5V.At present, this electronic part has a status of Obsolete.Data is communicated via 2 serial I/Os.Mounting it through Surface Mount is possible.During operation, the supply voltage is set to 5V.Electronic devices such as this are known as 44-pin integrated circuits.There is 3.6864MHz clock frequency measured on this IC.There are some characteristics of Configurable GPIO, Internal Oscillator, Timer/Counter that it possesses.85°C is the maximum temperature that it can operate at.Basically, it uses SCC2692A as its base part number.A minimum of -40°C is required for operation.
SCC2692AE1A44,529 Features
2 serial I/Os
Clock frequency of 3.6864MHz

SCC2692AE1A44,529 Applications
There are a lot of NXP USA Inc.
SCC2692AE1A44,529 UARTs applications.

Battery Operated Electronics
Handheld Terminal
Personal Digital Assistants
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
Personal Digital Assistants Modules

Mounting Type	Surface Mount
Package / Case	44-LCC (J-Lead)
Surface Mount	YES
Packaging	Tube
Published	1998
JESD-609 Code	e3
Feature	Configurable GPIO, Internal Oscillator, Timer/Counter
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	44
Terminal Finish	TIN
HTS Code	8542.31.00.01
Voltage - Supply	5V
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	245
Supply Voltage	5V
Terminal Pitch	1.27mm
Reach Compliance Code	unknown
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	SCC2692A
Pin Count	44
JESD-30 Code	S-PQCC-J44
Qualification Status	Not Qualified
Operating Temperature (Max)	85°C
Operating Temperature (Min)	-40°C
Temperature Grade	INDUSTRIAL
Number of Channels	2, DUART
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Clock Frequency	3.6864MHz
Address Bus Width	4
Boundary Scan	NO
Low Power Mode	YES
External Data Bus Width	8
Data Rate (Max)	1Mbps
Number of Serial I/Os	2
Data Transfer Rate-Max	0.125 MBps
Communication Protocol	ASYNC, BIT
Data Encoding/Decoding Method	NRZ
With Auto Flow Control	Yes
Length	16.5862mm
Height Seated (Max)	4.57mm
Width	16.5862mm
RoHS Status	ROHS3 Compliant