SI2456-FT OverviewThere is a possibility of mounting PCBs on Surface Mount.Package cost is one of the characteristics of the 24-TSSOP (0.173, 4.40mm Width).In order for 3V~3.6V Supply Voltage to function normally, 3V~3.6V Supply Voltage must be present.It is connected by a 24-pin.A variety of 24 pins can be used depending on the application.The program terminates at 24 points.In order for 70°C to be higher than Operating Temperature, it should be lower.During operation, it should increase the temperature of 0°C.The voltage at 3.3V is required for this system to function.Performance-cost ratio makes this series an excellent value.A sufficient supply current is required by 3.3V so that it can function properly.Its ability to operate with 26mA supply voltage makes the device a great choice for many different applications.Using the frequency 4.92MHz, it operates.
SI2456-FT Features24-TSSOP (0.173, 4.40mm Width) package
24 pins
24 pin count
24 terminations
ISOmodem® series
the frequency of 4.92MHz
SI2456-FT ApplicationsThere are a lot of Silicon Labs
SI2456-FT Modems ICs & Modules applications.
Ethernet circuitry
Wired telephone
Cordless telephone
Desktop PC
Notebook
Pocket PC
Desktop radio
Clock radio
Tuner
Portable radio
| Factory Lead Time | 9 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 211.997734mg |
| Series | ISOmodem® |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 4.92MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Interface | Parallel, SPI, UART |
| Operating Supply Current | 26mA |
| Data Rate | 56 kbps |
| Baud Rate | 56k |
| Data Format | V.21, V.22, V.23, V.32, V.34, V.90, Bell 103, Bell 212A |
| Height | 1.05mm |
| Length | 7.8mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
SI2456-FT Datasheet
+8613715157867