SI5376B-A-GL Overview
As a clock IC, PLLs is packaged using the Tray method. This clock generator is embedded in the 80-LBGA package. 80 terminations can be found in frequency synthesizer. Basically, a voltage of 1.8V should be applied to this electronic frequency generator. Clock is designed as this clock generator's input. 1 circuits are implemented to access the electronic component's full performance. This clock-based frequency generator provides a frequency up to 808MHz Max. This component can be conveniently installed on the panel thanks to the Surface Mount. Clock PLL works with 1.71V~2.75V supply voltage provided. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. This is a clock generator compatible with CML, LVCMOS, LVDS, LVPECL logic levels. This electronic component can be classified as a Clock Multiplier, Jitter Attenuator. There is an available 80 pin on the clock generators. RF synthesizers can handle voltages up to 2.5V. This electronic part is a member of the DSPLL® series. A supply current of 1A needs to be provided to fully play RF synthesizer's function.
SI5376B-A-GL Features
Available in the 80-LBGA
Supply voltage of 1.8V
Operating supply voltage of 2.5V

SI5376B-A-GL Applications
There are a lot of Silicon Labs
SI5376B-A-GL Clock Generators applications.

Instrument
Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks

Factory Lead Time	6 Weeks
Mounting Type	Surface Mount
Package / Case	80-LBGA
Surface Mount	YES
Number of Pins	80
Weight	50.008559mg
Operating Temperature	-40°C~85°C
Packaging	Tray
Series	DSPLL®
Published	2003
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	80
ECCN Code	EAR99
Type	Clock Multiplier, Jitter Attenuator
Voltage - Supply	1.71V~2.75V
Terminal Position	BOTTOM
Terminal Form	BALL
Supply Voltage	1.8V
Output	CML, LVCMOS, LVDS, LVPECL
Operating Supply Voltage	2.5V
Number of Circuits	1
Operating Supply Current	1A
Frequency (Max)	808MHz
Input	Clock
Ratio - Input:Output	8:8
Primary Clock/Crystal Frequency-Nom	710MHz
PLL	Yes
Differential - Input:Output	Yes/Yes
RoHS Status	RoHS Compliant