SL23EP04SI-2H Overview
As a clock IC, it uses the Tube package. 8-SOIC (0.154, 3.90mm Width) contains this Clock PLL. As a result, frequency synthesizers can be found to contain 8 terminations. For this clock generator ic, a voltage of 2.5V is required. This Clock PLL will be fed by Clock as its input. There are 1 circuits implemented in order to achieve full performance from this electronic part. Providing a maximum frequency of 220MHz, this clock-based RF synthesizer is suitable for a variety of applications. The Surface Mount allows this electrical component to be easily installed on the panel. It would be possible to supply this clock PLL with 2.75V of power. For safety reasons, this frequency generator's supply voltage should remain above 2.25V. There are 2.97V~3.63V different supply voltages that can be provided for this RF synthesizer. Based on test statistics, ambient temperature should be set at -40°C~85°C. I would like to present to you a frequency synthesizer that is compatible with LVCMOS logic levels. In particular, this clock PLL is designed to be used with microprocessors. SL23EP04 is the base part number for finding related electronic parts. There is a 8 pin that is available on the digital clock generator. In order to provide better clock signal output, this frequency synthesizer is equipped with ALSO OPERATES WITH 3.3V SUPPLY. 4 signal outputs allow for maximi4ation of output frequency. At 0.25 ns Max, this analog clock generator exhibits low timing skew. Input data is processed by combining clock logic function Buffer.
SL23EP04SI-2H Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 2.5V

SL23EP04SI-2H Applications
There are a lot of Silicon Labs
SL23EP04SI-2H Clock Generators applications.

Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
Multi-function printers

Factory Lead Time	6 Weeks
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Weight	50.008559mg
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	2011
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2A (4 Weeks)
Number of Terminations	8
Additional Feature	ALSO OPERATES WITH 3.3V SUPPLY
Voltage - Supply	2.97V~3.63V
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	2.5V
Base Part Number	SL23EP04
Output	LVCMOS
Pin Count	8
Number of Outputs	4
Polarity	Non-Inverting
Supply Voltage-Max (Vsup)	2.75V
Supply Voltage-Min (Vsup)	2.25V
Number of Circuits	1
Nominal Supply Current	16mA
Propagation Delay	200 ps
Frequency (Max)	220MHz
Logic Function	Buffer
Input	Clock
Ratio - Input:Output	1:4
PLL	Yes
Differential - Input:Output	No/No
High Level Output Current	-12mA
Low Level Output Current	12mA
Divider/Multiplier	Yes/Yes
Same Edge Skew-Max (tskwd)	0.25 ns
Schmitt Trigger Input	No
Height	1.549mm
Length	4.98mm
Width	3.987mm
RoHS Status	RoHS Compliant