STA333ML13TR Overview
With Tape & Reel (TR), it comes in a case. A Surface Mount mounting type is recommended for this product. In 36-BFSOP (0.295, 7.50mm Width) Exposed Pad case, it is embedded. With 2 channels, the device is equipped. You can refer to Fully Integrated Processor functions in this part. Pre-Amplifier is one of the possible applications of the device. Votage within 4.5V~20V is supplied. The device operates at a temperature in the range 0°C~70°C TA. On the chip, there are 36 terminations. Using the STA333 family as a search term will yield similar parts. The following specifications apply to the device: Direct Digital Amplification. On the chip, 36 pins are accessible. Consumer IC types can be sorted with CONSUMER CIRCUIT. This part should have a minimum supply voltage of 4.5V (Vsup). There is a voltage range of 3.318V volts that it can produce. Once 18V is reached, the maximal supply voltage (Vsup) is reached. The mount is mounted by Surface Mount. Sound Terminal™-series components are used in this electrical component. Supply types can be categorized by Quad.
STA333ML13TR Features
With 36-BFSOP (0.295, 7.50mm Width) Exposed Pad channels
operate temperature at the range of 0°C~70°C TA
consumer IC type: CONSUMER CIRCUIT
supply type: Quad

STA333ML13TR Applications
There are a lot of STMicroelectronics
STA333ML13TR Audio Special Purpose applications.

Consumer electronics
AV/DVD Receiver, AV Amplifier
Car or Mobile Audio System
Digital Television
Musical Instruments
Recording Systems
High-End Audio/Sound Card for PC
Replacement of DIR1703
Other Applications Requiring S/PDIF Receiver
Audio Differential Line Drivers

Lifecycle Status	ACTIVE (Last Updated: 7 months ago)
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	36-BFSOP (0.295, 7.50mm Width) Exposed Pad
Number of Pins	36
Operating Temperature	0°C~70°C TA
Packaging	Tape & Reel (TR)
Series	Sound Terminal™
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	36
ECCN Code	EAR99
Applications	Pre-Amplifier
Voltage - Supply	4.5V~20V
Terminal Position	DUAL
Terminal Form	GULL WING
Terminal Pitch	0.5mm
Base Part Number	STA333
Function	Fully Integrated Processor
Supply Voltage-Max (Vsup)	18V
Power Supplies	3.318V
Supply Voltage-Min (Vsup)	4.5V
Number of Channels	2
Interface	I2S
Nominal Supply Current	30mA
Output Power	20W
Supply Type	Quad
Power Supply Rejection Ratio (PSRR)	80dB
Specifications	Direct Digital Amplification
Dual Supply Voltage	12V
Consumer IC Type	CONSUMER CIRCUIT
Length	10.3mm
Width	7.5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free