TE0712-02-200-2C3 Overview
FPGA Core is the type of module or board that is used in this microcontroller.Microprocessor chip is powered by a processor with a total of Artix-7 A200T cores in it.It is default for the microcontroller to set the mode to 0°C~70°C.There is a flash size 32MB on the MCU electronics.In this case, the connector type is Samtec LSHM.There are two versions of this microcontrollers in the TE0712 Series.This is done to make sure that the software is able to run normally and that the RAM size is reduced to 1GB.In this MCU chip, the speed is set to 200MHz.
TE0712-02-200-2C3 Features
Core processor of Artix-7 A200T
Flash size of 32MB
Speed of 200MHz

TE0712-02-200-2C3 Applications
There are a lot of Trenz Electronic GmbH
TE0712-02-200-2C3 Microcontroller, Microprocessor, FPGA Modules applications.

Industrial Control
Process Control
Process Monitoring
Healthcare Monitoring
Patient Monitoring
IoT Secure Gateways
Human Machine Interface
Human Machine Control Panel
Home and Building Automation
Thermostat

Factory Lead Time	12 Weeks
Operating Temperature	0°C~70°C
Series	TE0712
Published	2012
Size / Dimension	1.97 x 1.57 50mmx40mm
Part Status	Active
Moisture Sensitivity Level (MSL)	Not Applicable
Connector Type	Samtec LSHM
Speed	200MHz
RAM Size	1GB
Core Processor	Artix-7 A200T
Module/Board Type	FPGA Core
Flash Size	32MB
RoHS Status	ROHS3 Compliant