TE0841-02-040-1I Overview
FPGA Core is the type of module or board that is used in this microcontroller.Microprocessor chip is powered by a processor with a total of Kintex UltraScale KU40 cores in it.It is default for the microcontroller to set the mode to -40°C~85°C.There is a flash size 32MB on the MCU electronics.In this case, the connector type is B2B.There are two versions of this microcontrollers in the TE0841 Series.This is done to make sure that the software is able to run normally and that the RAM size is reduced to 512MB.
TE0841-02-040-1I Features
Core processor of Kintex UltraScale KU40
Flash size of 32MB

TE0841-02-040-1I Applications
There are a lot of Trenz Electronic GmbH
TE0841-02-040-1I Microcontroller, Microprocessor, FPGA Modules applications.

Industrial Control
Process Control
Process Monitoring
Healthcare Monitoring
Patient Monitoring
IoT Secure Gateways
Human Machine Interface
Human Machine Control Panel
Home and Building Automation
Thermostat

Factory Lead Time	14 Weeks
Operating Temperature	-40°C~85°C
Series	TE0841
Size / Dimension	1.97 x 1.57 50mmx40mm
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Connector Type	B2B
RAM Size	512MB
Core Processor	Kintex UltraScale KU40
Module/Board Type	FPGA Core
Flash Size	32MB