TIR1000IPWR Overview
Package 8-TSSOP (0.173, 4.40mm Width) contains the embedded encoder.In order to keep the encoder safe, it is recommended that you pack it in a Cut Tape (CT) case.Surface Mount-axis is mounted on this motor encoder.As a type, it falls under the Infrared Encoder/Decoder category.TIR1000 family is used to construct the motor encoder.Power supplies with switching capability use the 2.7V~5.5V digital power of the optical encoder.A 8 termination is available on the optical encoder.2.7V~5.5V can apply analog supply voltage.Total pin count on the rotary encoders is 8.Surface Mount mounts it on the wall.Encoders like this have 8 pins.In order for the encoder reader to run in a stable manner, the maximum 85°C must be set.In order for this rotary encoder to work properly, its minimum operating temperature must exceed -40°C.The rotary encoder is capable of working with a minimum supply voltage of 2.7V.A maximum voltage of 5.5V can be applied across the converter as the supply voltage.In addition, CAN ALSO OPERATE AT 5V SUPPLY can also be founded by using this rotary encoder.It can handle a voltage of 3V for its supply voltage.1 are on the encoder definition.
TIR1000IPWR Features
In 8-TSSOP (0.173, 4.40mm Width) package
Mounting Type: Surface Mount
Base Part Number: TIR1000
8 pins
1 circuits

TIR1000IPWR Applications
There are a lot of Texas Instruments
TIR1000IPWR Encoders, Decoders, Converters applications.

Car Alarms
Car Starters
Home Automation
Industrial Automation
Remote Status Monitoring
Lighting Control
Low-voltage operation
Extended temperature range
Low power consumption
UART Interfacing

Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP (0.173, 4.40mm Width)
Number of Pins	8
Weight	39.008944mg
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Infrared Encoder/Decoder
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Additional Feature	CAN ALSO OPERATE AT 5V SUPPLY
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	3V
Terminal Pitch	0.65mm
Base Part Number	TIR1000
Pin Count	8
Power Supplies	3/5V
Temperature Grade	INDUSTRIAL
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	2.7V
Nominal Supply Current	250mA
Data Rate	115 kbps
Voltage - Supply, Analog	2.7V~5.5V
Voltage - Supply, Digital	2.7V~5.5V
Number of Output Lines	2
Bus Compatibility	UART
Touchscreen	Infrared (IR)
Height	1.2mm
Length	3mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free