TL16C2550RHBRG4 OverviewThe VQFN EP package is the most cost-effective.Transmission uses 2 channels.As far as packaging is concerned, Tape & Reel (TR) is used.Its uPs/uCs/Peripheral ICs type is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.As part of its configuration, it uses 32 terminations.UART operates on 5V supply voltage.Currently, this electronic part is Active.As a way to communicate data, the board has 2 serial I/Os.Mounting is possible through Surface Mount.This device operates at 1.8 V ~ 5 V.There are 32 pins on this electronic device.UART is important that the operating temperature does not exceed -40°C in order for the machine to perform normally for a long time.It is important to keep the operating temperature below 85°C to ensure a long working period.A device's configuration is based on its 32 pins.The way of mounting it is Surface Mount.When the supply voltage is kept below 5.5V, reliability can be assured.Keeping the supply voltage above 1.62V ensures reliability.5V is the supply voltage provided for high-efficiency operation.Additionally, it is capable of performing ALSO OPERATES AT 1.8V MINIMUM SUPPLY AT 10MHZ.Its base part number is TL16C2550.1.5mA is the maximum allowable supply current.-- is the series number of the electronic component.
TL16C2550RHBRG4 Features2 serial I/Os
Operating supply voltage of 5V
ALSO OPERATES AT 1.8V MINIMUM SUPPLY AT 10MHZ
TL16C2550RHBRG4 ApplicationsThere are a lot of Texas Instruments
TL16C2550RHBRG4 UARTs applications.
Portable and battery operated devices
Cellular data devices
Industrial computing
Communications equipment
White goods
Battery Operated Electronics
Handheld Terminal
Personal Digital Assistants
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
| Mount | Surface Mount |
| Package / Case | VQFN EP |
| Mounting Type | Surface Mount |
| Number of Pins | 32 |
| Supplier Device Package | 32-VQFN (5x5) |
| Weight | 71.809342mg |
| Packaging | Tape & Reel (TR) |
| Series | -- |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 1.8V MINIMUM SUPPLY AT 10MHZ |
| Voltage - Supply | 1.8 V ~ 5 V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TL16C2550 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.62V |
| Nominal Supply Current | 1.5mA |
| Max Supply Current | 1.5mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Data Rate | 1 Mbps |
| Address Bus Width | 3 |
| Protocol | -- |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Data Rate (Max) | 1.5Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.1875 MBps |
| Communication Protocol | ASYNC, BIT |
| With False Start Bit Detection | Yes |
| Features | Internal Oscillator |
| With Modem Control | Yes |
| With Auto Flow Control | Yes |
| With IrDA Encoder/Decoder | -- |
| Length | 5mm |
| Height Seated (Max) | 1mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
+8613715157867