TL16C554AIPNR OverviewAlternatively, UART can be purchased in the cost-effective 80-LQFP package.Transmission is carried out over 4, QUART channels.Tape & Reel (TR) is adopted as the packaging option.Its uPs/uCs/Peripheral ICs use SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.The configuration uses 80 terminations.During operation, it receives a voltage of 3.3V.The status of this electronic part is currently Active.As a means of communicating data, there are 4 serial I/Os available.Surface Mount is the method for mounting it.In order for it to operate, a voltage of 3V~5.25V must be applied.This device is an integrated circuit with 80 pins.Its clock frequency is measured at 16MHz.In order for the equipment to work for a long period of time, it should not be allowed to reach a temperature above -40°C.UART is recommended that the operating temperature does not exceed 85°C to ensure long-term, normal performance.A configuration of the chip is determined by its 80 pins.A mounting method of Surface Mount is used.To ensure its high efficiency, a voltage of 5V is provided as the supply voltage.The base part number of the part is set to TL16C554.There is a maximum value for supply current that is 50mA.
TL16C554AIPNR Features4 serial I/Os
Clock frequency of 16MHz
Operating supply voltage of 5V
TL16C554AIPNR ApplicationsThere are a lot of Texas Instruments
TL16C554AIPNR UARTs applications.
White goods
Battery Operated Electronics
Handheld Terminal
Personal Digital Assistants
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Factory Lead Time | 16 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-LQFP |
| Number of Pins | 80 |
| Weight | 465.697616mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.31.00.01 |
| Voltage - Supply | 3V~5.25V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TL16C554 |
| Pin Count | 80 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4, QUART |
| Nominal Supply Current | 50mA |
| Max Supply Current | 50mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 16MHz |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 4 |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 16 Byte |
| With Modem Control | Yes |
| Height | 1.6mm |
| Length | 12mm |
| Width | 12mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867