TLE2027CDR OverviewPackaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 100μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. Using a supply current of 3.8mA , this buffer op amp will be able to operate. Keeping the voltage gain at 153.06dB is the best course of action. A total of 1 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 19V. A TR-shaped amplifier is used to pack the buffer amps. The Excalibur™ stands for the buffer op amp's serial number.
TLE2027CDR Features8 Pins
supply voltage of 15V
153.06dB voltage gain
TLE2027CDR ApplicationsThere are a lot of Texas Instruments
TLE2027CDR Instrumentational OP Amps applications.
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | TLE2027 |
| Pin Count | 8 |
| Operating Supply Voltage | 19V |
| Number of Elements | 1 |
| Operating Supply Current | 3.8mA |
| Nominal Supply Current | 5.3mA |
| Power Dissipation | 725mW |
| Slew Rate | 2.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 15nA |
| Voltage - Supply, Single/Dual (±) | 8V~38V ±4V~19V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 13MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 13000 kHz |
| Voltage Gain | 153.06dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 20μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.09μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 13MHz |
| Max I/O Voltage | 100μV |
| Input Offset Current-Max (IIO) | 0.09μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2027CDR Datasheet
+8613715157867