TLE2144IDWR OverviewOp amp is packaged in 16-SOIC (0.295, 7.50mm Width) case. Op amps are General Purpose types of amplifier on the chip. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 16. Linear amplifier has a total of 16 pins. Please take in mind that op amp should be run at 15V. Linear amplifier includes 16 pins. Regarding input offset voltage, buffer amplifier rates 3.8mV voltage. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges -40°C~105°C. Operational amplifier can operate supply current at 13.8mA. The voltage gain should stay at 99.55dB. Op amp has total of 4 elements. The operating supply voltage of instrumentation amplifier is rated 22V voltage. It is used TR to pack the op amps. Excalibur™ corresponds to linear amplifier's series.
TLE2144IDWR Features16 Pins
supply voltage of 15V
99.55dB voltage gain
TLE2144IDWR ApplicationsThere are a lot of Texas Instruments
TLE2144IDWR Instrumentational OP Amps applications.
Proportional operation circuits
Inverse/same-phase proportional circuit
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLE2144 |
| Pin Count | 16 |
| Operating Supply Voltage | 22V |
| Number of Elements | 4 |
| Power Supplies | 5/+-15V |
| Operating Supply Current | 13.8mA |
| Nominal Supply Current | 18mA |
| Output Current | 50mA |
| Slew Rate | 45V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 700nA |
| Voltage - Supply, Single/Dual (±) | 4V~44V ±2V~22V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 3.8mV |
| Bandwidth | 5.8MHz |
| Gain Bandwidth Product | 5.9MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 6000 kHz |
| Voltage Gain | 99.55dB |
| Average Bias Current-Max (IIB) | 1.7μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 600μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 2μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 5.8MHz |
| Max I/O Voltage | 3.8mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.1μA |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE2144IDWR Datasheet
+8613715157867