TLV5625IDR OverviewIn the 8-SOIC (0.154, 3.90mm Width) package, you will find it. In order to operate it, a voltage supply of 3V volts is required. Surface Mount-connectors can be used to attach this FPGA module to the development board. As far as the operating temperature is concerned, it should be kept within -40°C~85°C when operating. Unlike other FPGA models, this one is contained in Tape & Reel (TR) for the sake of space saving. 8 terminations are present in total. You can find related parts by using the part number TLV5625, which is its base part number. There is a 3/5V power supply that is required to operate it. With a total of 8 pins, it is equipped with a high level of security. It can accept a maximum voltage of 5.5V volts as a supply voltage. A minimal supply voltage of 2.7V is required for it to operate.
TLV5625IDR Features8-SOIC (0.154, 3.90mm Width) package
8 pin count
TLV5625IDR ApplicationsThere are a lot of Texas Instruments
TLV5625IDR Digital to Analog Converters (DAC) applications.
Data Acquisition Systems
Calibration
Motor Control
Data Distribution System
Digital Potentiometer
Software Radio
Wireless infrastructure:
WCDMA, CDMA2000, TD-SCDMA, WiMAX
Wideband communications:
LMDS/MMDS, point-to-point
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Factory Lead Time | 6 Weeks |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TLV5625 |
| Pin Count | 8 |
| Output Type | Voltage - Buffered |
| Polarity | Unipolar |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 1.8mA |
| Number of Bits | 8 |
| Architecture | String DAC |
| Converter Type | D/A CONVERTER |
| Supply Type | Single |
| Reference Type | External |
| Data Interface | SPI |
| Differential Output | No |
| Resolution | 1 B |
| Sampling Rate | 93 ksps |
| Voltage - Supply, Analog | 2.7V~3.3V 5V |
| Voltage - Supply, Digital | 2.7V~3.3V 5V |
| Settling Time | 10μs |
| Power Consumption | 2.4mW |
| Linearity Error-Max (EL) | 0.1953% |
| Integral Nonlinearity (INL) | 0.5 LSB |
| Input Bit Code | BINARY |
| Number of Converters | 2 |
| Conversion Rate | 93 ksps |
| INL/DNL (LSB) | ±0.3, ±0.07 |
| Signal to Noise Ratio (SNR) | 54 dB |
| Input Format | SERIAL |
| Differential Nonlinearity | 0.2 LSB |
| Spurious-free dynamic range (SFDR) | 50 dB |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867