TLV9064IPWT Overview
Packaging for the buffer amplifier is in the form of a 14-TSSOP (0.173, 4.40mm Width) case. A CMOS-type buffer amplifier is shown here. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. A total of 14 terminations have been reported in the past few weeks. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. An 14-pin op amp ic is included in the package. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~125°C TA as far as operating temperature is concerned. The buffer amp consists of 4 circuits in total. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. A supply of 538μA or higher is recommended for use with this electronic part.
TLV9064IPWT Features
supply voltage of 5V
Output Type: Rail-to-Rail

TLV9064IPWT Applications
There are a lot of Texas Instruments
TLV9064IPWT Instrumentational OP Amps applications.

single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing

Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Factory Lead Time	6 Weeks
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	14
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	14
Terminal Finish	Matte Tin (Sn)
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	TLV9064
Output Type	Rail-to-Rail
Number of Circuits	4
Current - Supply	538μA
Slew Rate	6.5V/μs
Amplifier Type	CMOS
Common Mode Rejection Ratio	103 dB
Current - Input Bias	0.5pA
Voltage - Supply, Single/Dual (±)	1.8V~5.5V
Bandwidth	10MHz
Unity Gain BW-Nom	10000 kHz
Average Bias Current-Max (IIB)	5e-7μA
Supply Voltage Limit-Max	6V
Voltage - Input Offset	300μV
Current - Output / Channel	50mA
Common-mode Reject Ratio-Min	80 dB
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
RoHS Status	ROHS3 Compliant