VCA810AID OverviewThe linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. This is a Variable Gain type op amp. Linear amplifier is delivered in a Tube case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 5V. The buffer op amp includes 8 pins. Regarding input offset voltage, op amp rates 250μV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~85°C. This op amp can operate from a supply current at 20mA. There are 1 circuits on this op amp. This linear amplifier has a total of 3 elements. Instrumentation amplifier resistance should remain within the range of 1MOhm.
VCA810AID Features8 Pins
supply voltage of 5V
Resistance of 1MOhm
VCA810AID ApplicationsThere are a lot of Texas Instruments
VCA810AID Instrumentational OP Amps applications.
Inverse/same-phase proportional circuit
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Factory Lead Time | 6 Weeks |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 1MOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | VCA810 |
| Pin Count | 8 |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Operating Supply Current | 20mA |
| Slew Rate | 350V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Variable Gain |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 6μA |
| Voltage - Supply, Single/Dual (±) | ±4V~6V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 35MHz |
| Gain Bandwidth Product | 35MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 35000 kHz |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | NO |
| Voltage - Input Offset | 100μV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 30MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | 200μV |
| Input Offset Current-Max (IIO) | 0.6μA |
| Input Voltage Noise Density | 2.4nV/sqrt Hz |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VCA810AID Datasheet
+8613715157867