ADA4075-2ARZ-R7 Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 1mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 3.6mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 117dB. There are a total of 2 channels available on the op amps. Buffer op amp series numbers are indicated by the iPolar®. The quiescent current is 1.8mA.
ADA4075-2ARZ-R7 Features
8 Pins
supply voltage of 15V
117dB voltage gain

ADA4075-2ARZ-R7 Applications
There are a lot of Analog Devices Inc.
ADA4075-2ARZ-R7 Instrumentational OP Amps applications.

Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering

Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Factory Lead Time	8 Weeks
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Series	iPolar®
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADA4075
Pin Count	8
Number of Channels	2
Operating Supply Current	3.6mA
Quiescent Current	1.8mA
Slew Rate	12V/μs
Amplifier Type	General Purpose
Common Mode Rejection Ratio	116 dB
Current - Input Bias	30nA
Voltage - Supply, Single/Dual (±)	±4.5V~18V
Output Current per Channel	40mA
Input Offset Voltage (Vos)	1mV
Gain Bandwidth Product	6.5MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	6500 kHz
Voltage Gain	117dB
Average Bias Current-Max (IIB)	0.15μA
Power Supply Rejection Ratio (PSRR)	104dB
Voltage - Input Offset	200μV
Settling Time	3 μs
Input Capacitance	2.1pF
Input Voltage Noise Density	2.8nV/sqrt Hz
Length	4.9mm
Height Seated (Max)	1.75mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead