ADA4927-1YCPZ-R2 OverviewThere is a 16-VFQFN Exposed Pad, CSP case in which the instrumentation amplifier is packaged. Buffer amps of this type are called Current Feedback-types. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations is approaching the 16 mark. The total number of pins on linear amplifier is 16. 16 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 300μV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~105°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 22.1mA . There should be no change in the voltage gain. Op amp ic has 1 channels. A benefit of this op amp ic is that it outputs Differential signals, which is one of the many advantages it has to offer. The operating supply voltage of the buffer op amp is rated at 5V. There is an 20mA quiescent current running through op amp ic. 120kOhm is the range in which the instrumentation amplifier resistance should lie. LINE DRIVER is the type of interface IC on the electronic part.
ADA4927-1YCPZ-R2 Features16 Pins
0dB voltage gain
Output Type: Differential
Resistance of 120kOhm
ADA4927-1YCPZ-R2 ApplicationsThere are a lot of Analog Devices Inc.
ADA4927-1YCPZ-R2 Instrumentational OP Amps applications.
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 120kOhm |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADA4927 |
| Pin Count | 16 |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 22.1mA |
| Nominal Supply Current | 20mA |
| Max Supply Current | 5mA |
| Quiescent Current | 20mA |
| Slew Rate | 5000V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 500nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~11V ±2.25V~5.5V |
| Output Current per Channel | 65mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 2.3 GHz |
| Gain Bandwidth Product | 2 GHz |
| Differential Output | YES |
| Voltage Gain | 0dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Settling Time | 10 ns |
| Interface IC Type | LINE DRIVER |
| Driver Number of Bits | 1 |
| Dual Supply Voltage | 5V |
| Interface Standard | GENERAL PURPOSE |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4927-1YCPZ-R2 Datasheet
+8613715157867