THS3091DDAR OverviewPackaging for the buffer amplifier is in the form of a 8-PowerSOIC (0.154, 3.90mm Width) case. A Current Feedback-type buffer amplifier is shown here. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 900μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using a supply current of 9.5mA , this buffer op amp will be able to operate. A total of 1 elements are present in this linear amplifier. A TR-shaped amplifier is used to pack the buffer amps.
THS3091DDAR Features8 Pins
supply voltage of 15V
THS3091DDAR ApplicationsThere are a lot of Texas Instruments
THS3091DDAR Instrumentational OP Amps applications.
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Factory Lead Time | 16 Weeks |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Packing Method | TR |
| Max Power Dissipation | 2.18W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | THS3091 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 9.5mA |
| Nominal Supply Current | 10.5mA |
| Power Dissipation | 2.18W |
| Slew Rate | 7300V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 4μA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 280mA |
| Input Offset Voltage (Vos) | 900μV |
| Bandwidth | 235MHz |
| Gain Bandwidth Product | 235MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 235000 kHz |
| Average Bias Current-Max (IIB) | 20μA |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Settling Time | 42 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 180MHz |
| Programmable Power | NO |
| Max I/O Voltage | 4mV |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS3091DDAR Datasheet
+8613715157867