AD5253BRU10 OverviewPackage 20-TSSOP (0.173, 4.40mm Width) contains it.At Non-Volatile, this pentometer is stored for the first time.This digital potentiometer includes 4 embedded circuits.The digital analogic is secured using this package Tube.64 taps protect this pentometer against overcurrent.64 positions make up the pentometer.A termination of 20 is intended.The following programmable potentiometer includes 4 functions.Based on the picture, the total resistance of the speed potentiometers is 10000Ohm.The performance of the product is powered by 2.5V.On the digi devices, you can see the 20 pins.In general, Surface Mount is recommended for mounting.It can supply voltages up to 2.7V~5.5V ±2.25V~2.75V.For this digital potentiometer, there is a temperature range of -40°C~105°C.Flow can be restricted using 10kOhm.Pentometer belongs to the family AD5253.The Surface Mount mounts digital potentiometer.20 pins are present on this potentiameter.It is possible to find Selectable Address using this digital variable resistor.Potentiometers conduct when the supply voltage is 2.75V.At 3/5V, it delivers voltage.When the frequency is set to 400kHz, it maintains high accuracy.The maximum supply current can be set to 5μA.As long as 5μA is set, potentiameter consumes quiescent current.Connect this pentometer to the max dual supply voltage of 2.75V.Dual supply voltage up to 2.25V ensures stable power.
AD5253BRU10 FeaturesAvailable in 20-TSSOP (0.173, 4.40mm Width) package
4 Circuits
Mounting Type: Surface Mount
Operate temperature at the range of -40°C~105°C
20 pins
Operate supply voltage at the range of 2.75V
Quiescent Current at 5μA
AD5253BRU10 ApplicationsThere are a lot of Analog Devices Inc.
AD5253BRU10 Digital Potentiometers applications.
Refrigerator
Programmable computer
Power supply
Power meter
Automatic detection of equipment
Optic fiber network
Adjusting the LCD Display
Voltage control
Replaces mechanical potentiometers
Matching Linear Impedance
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tube |
| Tolerance | ±20% |
| JESD-609 Code | e0 |
| Feature | Selectable Address |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Temperature Coefficient | 300 ppm/°C |
| Resistance | 10kOhm |
| Number of Positions | 64 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Voltage - Supply | 2.7V~5.5V ±2.25V~2.75V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Frequency | 400kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD5253 |
| Pin Count | 20 |
| Operating Supply Voltage | 2.75V |
| Power Supplies | 3/5V |
| Configuration | Potentiometer |
| Interface | I2C |
| Number of Circuits | 4 |
| Nominal Supply Current | 3μA |
| Memory Type | Non-Volatile |
| Max Supply Current | 5μA |
| Quiescent Current | 5μA |
| Bandwidth | 0.4 kHz |
| Taper | Linear |
| Max Dual Supply Voltage | 2.75V |
| Min Dual Supply Voltage | 2.25V |
| Dual Supply Voltage | 2.5V |
| Negative Supply Voltage-Nom | -2.5V |
| Number of Taps | 64 |
| Total Resistance | 10000Ohm |
| Resistance - Wiper (Ω) (Typ) | 200 |
| Temperature Coefficient (Typ) | 650ppm/°C |
| Length | 6.5mm |
| Height Seated (Max) | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |