AD9571ACPZLVD OverviewTray-method packaging is used for clock ICs. The 40-WFQFN Exposed Pad, CSP package contains this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains 40 terminations that can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 3.3V. The input of this clock generator is designed to be Crystal. To access the full performance of the electronic component, 1 circuits are implemented. There is a maximum frequency of 156.25MHz Max with this clock-based frequency generator. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. This clock generator would require a maximum supply voltage of 3.6V. For safety reasons, this frequency synthesizer should have a voltage supply above 3V. As far as the supply voltage is concerned, clock PLL can be used with 2.97V~3.63V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. As the name suggests, this is a clock generator that is compatible with CMOS, LVDS, LVPECL logic levels. This electronic component is usually classified as a Clock Generator, Fanout Distribution, Multiplexer component. The clock-generating IC is a 40-bit device designed specifically for microprocessors. You can find related electrical components to the base part number AD9571. It is possible to connect to the frequency generators via 40 pins. There is a maximum supply voltage of 3.3V that clock generator can handle. 10 signal outputs enable clock PLL to magnify output frequency as high as possible. At a frequency of 25MHz, frequency generator is capable of achieving high efficiency. This frequency synthesizer operates at a maximum current of 1μA.
AD9571ACPZLVD FeaturesAvailable in the 40-WFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
AD9571ACPZLVD ApplicationsThere are a lot of Analog Devices Inc.
AD9571ACPZLVD Clock Generators applications.
Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-WFQFN Exposed Pad, CSP |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution, Multiplexer |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD9571 |
| Output | CMOS, LVDS, LVPECL |
| Pin Count | 40 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 1μA |
| Max Supply Current | 1μA |
| Frequency (Max) | 156.25MHz |
| Input | Crystal |
| Ratio - Input:Output | 1:10 |
| PLL | Yes |
| Differential - Input:Output | No/Yes |
| Max Duty Cycle | 55 % |
| Divider/Multiplier | Yes/No |
| Height | 750μm |
| Length | 6.1mm |
| Width | 6.1mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD9571ACPZLVD Datasheet
+8613715157867