ADF4116BRUZ-REEL OverviewTape & Reel (TR)-method packaging is used for clock ICs. The 16-TSSOP (0.173, 4.40mm Width) package contains this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains 16 terminations that can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 3V. The input of this clock generator is designed to be CMOS, TTL. To access the full performance of the electronic component, 1 circuits are implemented. There is a maximum frequency of 550MHz Max with this clock-based frequency generator. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. As far as the supply voltage is concerned, clock PLL can be used with 2.7V~5.5V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. As the name suggests, this is a clock generator that is compatible with Clock logic levels. This electronic component is usually classified as a Clock/Frequency Synthesizer (RF) component. The clock-generating IC is a 16-bit device designed specifically for microprocessors. You can find related electrical components to the base part number ADF4116. It is possible to connect to the frequency generators via 16 pins. There is a maximum supply voltage of 5V that clock generator can handle. 2 signal outputs enable clock PLL to magnify output frequency as high as possible. For the RF synthesizer to function properly, a supply current of 4.5mA must be provided. This electronic frequency generator should not be supplied with more than 5.5mA of current.
ADF4116BRUZ-REEL FeaturesAvailable in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 5V
ADF4116BRUZ-REEL ApplicationsThere are a lot of Analog Devices Inc.
ADF4116BRUZ-REEL Clock Generators applications.
Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Clock/Frequency Synthesizer (RF) |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADF4116 |
| Output | Clock |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Circuits | 1 |
| Operating Supply Current | 4.5mA |
| Nominal Supply Current | 4.5mA |
| Frequency (Max) | 550MHz |
| Supply Current-Max (Isup) | 5.5mA |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4116BRUZ-REEL Datasheet
+8613715157867