ISPPAC-CLK5510V-01TN48C Overview
The Tray method is used for packaging clock ICs. As part of the 48-LQFP package, this clock generator is embedded. In this clock generator, HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL is used as the input to the clock. For a full understanding of the electronic part's performance, 1 circuits are implemented. An up to 320MHz frequency is provided by this clock-based RF synthesizer. The Surface Mount allows the electrical component to be installed conveniently on the panel. In terms of supply voltage, RF synthesizer works with 3V~3.6V. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. The frequency synthesizer in this product is compatible with all levels of HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL logic. It is possible to find its related electronic parts by searching for the base part number ISPPAC-CLK5510. There are 48 pins on the frequency generators that are available for use. There are 0°C operations that can be performed on this clock generator, which has impressive low-temperature performance. At 70°C, this RF synthesizer remains functional despite reduced performance. Supply voltage 3.3V is what clock generator can handle. ispClock™ series electronic parts are used in this part. 10 signal outputs are provided for enhancing output frequency as much as possible. There is no way that a voltage higher than 3.6V can be supplied to this clock generator. Powered by 3V, this clock generator has the lowest supply voltage limit. The clock PLL here has 1 elements and has a very low jitter performance.
ISPPAC-CLK5510V-01TN48C Features
Available in the 48-LQFP
Operating supply voltage of 3.3V

ISPPAC-CLK5510V-01TN48C Applications
There are a lot of Lattice Semiconductor Corporation
ISPPAC-CLK5510V-01TN48C Clock Generators applications.

Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems

Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	48-LQFP
Number of Pins	48
Supplier Device Package	48-TQFP (7x7)
Operating Temperature	0°C~70°C
Packaging	Tray
Series	ispClock™
Published	2000
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Voltage - Supply	3V~3.6V
Base Part Number	ISPPAC-CLK5510
Output	HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL
Number of Outputs	10
Operating Supply Voltage	3.3V
Number of Elements	1
Number of Circuits	1
Max Supply Voltage	3.6V
Min Supply Voltage	3V
Nominal Supply Current	150mA
Frequency (Max)	320MHz
Input	HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL
Ratio - Input:Output	1:10
PLL	Yes with Bypass
Differential - Input:Output	Yes/Yes
Divider/Multiplier	Yes/No
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Lead Free