BU3087FV-E2 Overview
Cut Tape (CT)-method packaging is used for clock ICs. The 16-LSSOP (0.173, 4.40mm Width) package contains this clock generator. The input of this clock generator is designed to be Crystal. To access the full performance of the electronic component, 1 circuits are implemented. There is a maximum frequency of 74.25MHz Max with this clock-based frequency generator. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. As far as the supply voltage is concerned, clock PLL can be used with 3.135V~3.465V. Based on the test statistics, an ambient temperature of -10°C~75°C should be set. As the name suggests, this is a clock generator that is compatible with Clock logic levels. It is possible to connect to the PLL via 16 pins.
BU3087FV-E2 Features
Available in the 16-LSSOP (0.173, 4.40mm Width)

BU3087FV-E2 Applications
There are a lot of ROHM Semiconductor
BU3087FV-E2 Clock Generators applications.

Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange

Factory Lead Time	10 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-LSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-10°C~75°C
Packaging	Cut Tape (CT)
Published	2012
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Voltage - Supply	3.135V~3.465V
Output	Clock
Number of Circuits	1
Oscillator Type	CMOS
Frequency (Max)	74.25MHz
Input	Crystal
Ratio - Input:Output	1:2
PLL	Yes with Bypass
Differential - Input:Output	No/No
RoHS Status	ROHS3 Compliant