NBC12430AFAR2 Overview
The Tape & Reel (TR) method is used for packaging clock ICs. As part of the 32-LQFP package, this clock generator is embedded. This clock generator ic can sustain 240 degrees of temperature during reflowing. There are 32 terminations found in this file. To operate this time clock generator, 3.3V voltage should be applied. In this clock generator, Crystal is used as the input to the clock. For a full understanding of the electronic part's performance, 1 circuits are implemented. An up to 800MHz frequency is provided by this clock-based RF synthesizer. The Surface Mount allows the electrical component to be installed conveniently on the panel. In terms of supply voltage, RF synthesizer works with 3.135V~5.25V. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. The frequency synthesizer in this product is compatible with all levels of PECL logic. It has been classified as a PLL Clock Generator electronic part, which means that it is a semiconductor. It is a 32-bit clock PLL designed specifically for microprocessors. It is possible to find its related electronic parts by searching for the base part number NBC12430A. There are 32 pins on the frequency generators that are available for use. Supply voltage 5V is what clock generator can handle. Elemental destruction can occur when the supply current is exceeded (higher than 85mA)
NBC12430AFAR2 Features
Available in the 32-LQFP
Supply voltage of 3.3V
Operating supply voltage of 5V

NBC12430AFAR2 Applications
There are a lot of ON Semiconductor
NBC12430AFAR2 Clock Generators applications.

Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems

Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	32-LQFP
Number of Pins	32
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Published	2007
JESD-609 Code	e0
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	32
ECCN Code	EAR99
Type	PLL Clock Generator
Terminal Finish	Tin/Lead (Sn80Pb20)
Voltage - Supply	3.135V~5.25V
Terminal Position	QUAD
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Supply Voltage	3.3V
Terminal Pitch	0.8mm
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	NBC12430A
Output	PECL
Pin Count	32
Qualification Status	Not Qualified
Operating Supply Voltage	5V
Number of Circuits	1
Supply Current-Max	85mA
Frequency (Max)	800MHz
Input	Crystal
Ratio - Input:Output	1:1
Primary Clock/Crystal Frequency-Nom	20MHz
PLL	Yes
Differential - Input:Output	No/Yes
Divider/Multiplier	Yes/No
Length	7mm
Width	7mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead