CDCE18005RGZT OverviewTape & Reel (TR)-method packaging is used for clock ICs. The 48-VFQFN Exposed Pad package contains this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains 48 terminations that can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 3.3V. The input of this clock generator is designed to be LVCMOS, LVDS, LVPECL. To access the full performance of the electronic component, 1 circuits are implemented. There is a maximum frequency of 1.5GHz Max with this clock-based frequency generator. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. This clock generator would require a maximum supply voltage of 3.6V. For safety reasons, this frequency synthesizer should have a voltage supply above 3V. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. As the name suggests, this is a clock generator that is compatible with LVCMOS, LVDS, LVPECL logic levels. This electronic component is usually classified as a Clock Generator component. The clock-generating IC is a 48-bit device designed specifically for microprocessors. You can find related electrical components to the base part number CDCE18005. It is possible to connect to the frequency generators via 48 pins. 5 signal outputs enable clock PLL to magnify output frequency as high as possible. When searching for parts of the CDC family, similar frequency generators will be found. At a frequency of 250MHz, frequency generator is capable of achieving high efficiency. This clock generator ic is ideally suited to the TR package.
CDCE18005RGZT FeaturesAvailable in the 48-VFQFN Exposed Pad
Supply voltage of 3.3V
CDCE18005RGZT ApplicationsThere are a lot of Texas Instruments
CDCE18005RGZT Clock Generators applications.
Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Factory Lead Time | 6 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Number of Pins | 48 |
| Weight | 138.005479mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Clock Generator |
| Packing Method | TR |
| Max Power Dissipation | 1W |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 250MHz |
| Base Part Number | CDCE18005 |
| Output | LVCMOS, LVDS, LVPECL |
| Pin Count | 48 |
| Number of Outputs | 5 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SPI, Serial |
| Number of Circuits | 1 |
| Nominal Supply Current | 20mA |
| Propagation Delay | 4 ns |
| Frequency (Max) | 1.5GHz |
| Family | CDC |
| Input | LVCMOS, LVDS, LVPECL |
| Ratio - Input:Output | 3:10 |
| PLL | No |
| Differential - Input:Output | Yes/Yes |
| Input Current | 20mA |
| Divider/Multiplier | Yes/No |
| Height | 1mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867