CDCV850DGGR Overview
It is packaged using the Tape & Reel (TR) method since it is a clock IC. Embedded in the 48-TFSOP (0.240, 6.10mm Width) package is this Clock PLL. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. It contains a total of 48 terminations within RF synthesizer. This clock generator ic should receive a voltage of 2.5V. It is designed that the Clock PLL's input should be LVTTL, SSTL-2. A total of 1 circuits are implemented to access the full performance of the electrical part. Because of the Surface Mount, clock PLL can be easily mounted on the panel. Clock PLL is capable of receiving a maximum of 2.7V as a supply voltage. There should be a voltage supply above 2.3V for this frequency generator in order to ensure its safety. As long as you provide 2.3V~2.7V supply voltage, it will work. Using the test statistics, we estimate that the ambient temperature should be 0°C~85°C. The RF synthesizer is compatible with SSTL-2 logic levels. An electrical part such as this one can be classified as a PLL Clock Driver component. In this IC, a 48-bit frequency generator is designed specifically for use in microprocessors. This part number is related to its related electronic parts. There are a number of 48 pins that are available on the clock generators. There is a maximum supply voltage of 2.5V that frequency generators can handle. 10 signal outputs maximi10e the output frequency. Low timing skew is provided by this analog clock generator at maximum 0.075 ns. When searching for parts belonging to the 850 family, similar electric components can be found. At 140MHz, frequency synthesizer achieves high efficiency. TR is an ideal package for this electronic frequency generator.
CDCV850DGGR Features
Available in the 48-TFSOP (0.240, 6.10mm Width)
Supply voltage of 2.5V
Operating supply voltage of 2.5V

CDCV850DGGR Applications
There are a lot of Texas Instruments
CDCV850DGGR Clock Generators applications.

1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
Multi-function printers
Media broadcast servers

Lifecycle Status	OBSOLETE (Last Updated: 2 weeks ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	48-TFSOP (0.240, 6.10mm Width)
Number of Pins	48
Weight	223.195796mg
Operating Temperature	0°C~85°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	48
Type	PLL Clock Driver
Packing Method	TR
Voltage - Supply	2.3V~2.7V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Terminal Pitch	0.5mm
Frequency	140MHz
Base Part Number	CDCV850
Output	SSTL-2
Pin Count	48
Number of Outputs	10
Operating Supply Voltage	2.5V
Supply Voltage-Max (Vsup)	2.7V
Power Supplies	2.52.5/3.3V
Supply Voltage-Min (Vsup)	2.3V
Number of Circuits	1
Nominal Supply Current	6mA
Family	850
Input	LVTTL, SSTL-2
Ratio - Input:Output	1:11
PLL	Yes with Bypass
Differential - Input:Output	Yes/Yes
Propagation Delay (tpd)	4 ns
Divider/Multiplier	No/No
Same Edge Skew-Max (tskwd)	0.075 ns
Height	1.2mm
Length	12.5mm
Width	6.1mm
Thickness	1.15mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free