CDCVF857RHAT Overview
It is packaged using the Tape & Reel (TR) method since it is a clock IC. Embedded in the 40-VFQFN Exposed Pad package is this Clock PLL. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. It contains a total of 40 terminations within RF synthesizer. This clock generator ic should receive a voltage of 2.5V. It is designed that the Clock PLL's input should be SSTL-2. A total of 1 circuits are implemented to access the full performance of the electrical part. Because of the Surface Mount, clock PLL can be easily mounted on the panel. Clock PLL is capable of receiving a maximum of 2.7V as a supply voltage. There should be a voltage supply above 2.3V for this frequency generator in order to ensure its safety. As long as you provide 2.3V~2.7V supply voltage, it will work. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. An electrical part such as this one can be classified as a PLL Clock Driver component. In this IC, a 40-bit frequency generator is designed specifically for use in microprocessors. This part number is related to its related electronic parts. There are a number of 40 pins that are available on the clock generators. There is a maximum supply voltage of 2.5V that frequency generators can handle. 10 signal outputs maximi10e the output frequency. Low timing skew is provided by this analog clock generator at maximum 0.04 ns. When searching for parts belonging to the 857 family, similar electric components can be found. At 220MHz, frequency synthesizer achieves high efficiency. To fully perform its function, time clock generator requires a supply current of 6mA. When this RF synthesizer is operated at its maximum current, it will supply 10mA. TR is an ideal package for this electronic frequency generator.
CDCVF857RHAT Features
Available in the 40-VFQFN Exposed Pad
Supply voltage of 2.5V
Operating supply voltage of 2.5V

CDCVF857RHAT Applications
There are a lot of Texas Instruments
CDCVF857RHAT Clock Generators applications.

1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
Multi-function printers
Media broadcast servers

Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Factory Lead Time	6 Weeks
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	40-VFQFN Exposed Pad
Number of Pins	40
Weight	103.986051mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	40
ECCN Code	EAR99
Type	PLL Clock Driver
Packing Method	TR
Voltage - Supply	2.3V~2.7V
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Terminal Pitch	0.5mm
Frequency	220MHz
Base Part Number	CDCVF857
Pin Count	40
Number of Outputs	10
Operating Supply Voltage	2.5V
Supply Voltage-Max (Vsup)	2.7V
Supply Voltage-Min (Vsup)	2.3V
Number of Circuits	1
Operating Supply Current	6mA
Nominal Supply Current	10mA
Max Supply Current	10mA
Family	857
Output Characteristics	3-STATE
Input	SSTL-2
Ratio - Input:Output	2:11
PLL	Yes with Bypass
Differential - Input:Output	Yes/Yes
Propagation Delay (tpd)	3.5 ns
Divider/Multiplier	No/No
Same Edge Skew-Max (tskwd)	0.04 ns
Height	1mm
Length	6mm
Width	6mm
Thickness	900μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free