CDCVF857RTBR Overview
As a clock IC, it uses the Tape & Reel (TR) package. 40-VFQFN Exposed Pad contains this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of NOT SPECIFIED. As a result, frequency synthesizers can be found to contain 40 terminations. For this clock generator ic, a voltage of 2.5V is required. This Clock PLL will be fed by SSTL-2 as its input. There are 1 circuits implemented in order to achieve full performance from this electronic part. Providing a maximum frequency of 220MHz, this clock-based RF synthesizer is suitable for a variety of applications. The Surface Mount allows this electrical component to be easily installed on the panel. It would be possible to supply this clock PLL with 2.7V of power. For safety reasons, this frequency generator's supply voltage should remain above 2.3V. There are 2.3V~2.7V different supply voltages that can be provided for this RF synthesizer. Based on test statistics, ambient temperature should be set at -40°C~85°C. This is an electronic part that can be classified as a PLL Clock Driver in this case. In particular, this clock PLL is designed to be used with microprocessors. CDCVF857 is the base part number for finding related electronic parts. There is a 40 pin that is available on the digital clock generator. The maximum supply voltage that clock generator can handle is 2.5V. 10 signal outputs allow for maximi10ation of output frequency. At 0.04 ns Max, this analog clock generator exhibits low timing skew. The 857 family of parts can be used to find electric parts that are similar to each other.
CDCVF857RTBR Features
Available in the 40-VFQFN Exposed Pad
Supply voltage of 2.5V
Operating supply voltage of 2.5V

CDCVF857RTBR Applications
There are a lot of Texas Instruments
CDCVF857RTBR Clock Generators applications.

Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
Multi-function printers

Contact Plating	Lead, Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	40-VFQFN Exposed Pad
Number of Pins	40
Weight	96.189932mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	40
Type	PLL Clock Driver
Voltage - Supply	2.3V~2.7V
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	1
Supply Voltage	2.5V
Terminal Pitch	0.5mm
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	CDCVF857
Pin Count	40
Number of Outputs	10
Qualification Status	Not Qualified
Operating Supply Voltage	2.5V
Supply Voltage-Max (Vsup)	2.7V
Supply Voltage-Min (Vsup)	2.3V
Number of Circuits	1
Nominal Supply Current	10mA
Frequency (Max)	220MHz
Family	857
Output Characteristics	3-STATE
Input	SSTL-2
Ratio - Input:Output	2:11
PLL	Yes with Bypass
Differential - Input:Output	Yes/Yes
Propagation Delay (tpd)	3.5 ns
Divider/Multiplier	No/No
fmax-Min	220 MHz
Same Edge Skew-Max (tskwd)	0.04 ns
Length	6mm
Height Seated (Max)	0.9mm
Width	6mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead