FAN4852IMU8X OverviewThe linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. This is a General Purpose type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. Please take in mind that this instrumentation amplifier should be run at 3.3V. The buffer op amp includes 8 pins. Regarding input offset voltage, op amp rates 1mV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~85°C. This op amp can operate from a supply current at 900μA. Voltage gain should remain at 120dB. The op amp ic has 2 channels on it. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The operating supply voltage of the buffer op amp is rated at 5V. TAPE AND REEL is adopted to pack the instrumentation amplifier.
FAN4852IMU8X Featuressupply voltage of 3.3V
120dB voltage gain
Output Type: Rail-to-Rail
FAN4852IMU8X ApplicationsThere are a lot of ON Semiconductor
FAN4852IMU8X Instrumentational OP Amps applications.
Inverse/same-phase proportional circuit
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 140mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TAPE AND REEL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | FAN4852 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 2 |
| Operating Supply Current | 900μA |
| Slew Rate | 6.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 77 dB |
| Current - Input Bias | 0.1pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5V |
| Output Current per Channel | 90mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 9MHz |
| Unity Gain BW-Nom | 9000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0005μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 300μV |
| Low-Bias | YES |
| Micropower | NO |
| -3db Bandwidth | 9MHz |
| Max Frequency | 1.8GHz |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Programmable Power | NO |
| Input Voltage Noise Density | 10nV/sqrt Hz |
| Input Noise Current Density | 0.005pA/sqrt Hz |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FAN4852IMU8X Datasheet
+8613715157867