NB3N1200KMNTXG Overview
As a clock IC, it uses the Tape & Reel (TR) package. 64-VFQFN Exposed Pad contains this Clock PLL. As a result, frequency synthesizers can be found to contain 64 terminations. For this clock generator ic, a voltage of 3.3V is required. This Clock PLL will be fed by Clock as its input. There are 1 circuits implemented in order to achieve full performance from this electronic part. The Surface Mount allows this electrical component to be easily installed on the panel. It would be possible to supply this clock PLL with 3.465V of power. There are 3.135V~3.465V different supply voltages that can be provided for this RF synthesizer. Based on test statistics, ambient temperature should be set at 0°C~70°C. I would like to present to you a frequency synthesizer that is compatible with HCSL logic levels. NB3N1200 is the base part number for finding related electronic parts. There is a 64 pin that is available on the digital clock generator. The maximum supply voltage that clock generator can handle is 3.3V. 12 signal outputs allow for maximi12ation of output frequency. At 0.05 ns Max, this analog clock generator exhibits low timing skew. The NB3 family of parts can be used to find electric parts that are similar to each other. At a frequency of 133MHz, the system can achieve high efficiency. This time clock generator requires a supply current of 330mA in order to operate properly. In this RF synthesizer operation, 330mA of current are supplied.
NB3N1200KMNTXG Features
Available in the 64-VFQFN Exposed Pad
Supply voltage of 3.3V
Operating supply voltage of 3.3V

NB3N1200KMNTXG Applications
There are a lot of ON Semiconductor
NB3N1200KMNTXG Clock Generators applications.

Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
Multi-function printers

Lifecycle Status	ACTIVE (Last Updated: 16 hours ago)
Factory Lead Time	4 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	64-VFQFN Exposed Pad
Number of Pins	64
Weight	206.29948mg
Operating Temperature	0°C~70°C
Packaging	Tape & Reel (TR)
Published	2013
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	64
Terminal Finish	Tin (Sn)
Voltage - Supply	3.135V~3.465V
Terminal Position	QUAD
Number of Functions	1
Supply Voltage	3.3V
Terminal Pitch	0.5mm
Frequency	133MHz
Base Part Number	NB3N1200
Output	HCSL
Number of Outputs	12
Operating Supply Voltage	3.3V
Supply Voltage-Max (Vsup)	3.465V
Number of Circuits	1
Operating Supply Current	330mA
Max Supply Current	330mA
Propagation Delay	100 ps
Quiescent Current	330mA
Family	NB3
Input	Clock
Ratio - Input:Output	1:12
PLL	Yes with Bypass
Differential - Input:Output	Yes/Yes
Max Duty Cycle	55 %
Divider/Multiplier	No/No
Same Edge Skew-Max (tskwd)	0.05 ns
Height	950μm
Length	9mm
Width	9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free