OMAPL137BZKBD4 Overview
The microprocessor is conveniently packaged in 256-BGA, making it easy to ship internationally. High reliability is provided by the advanced packaging method Tray. There are 1 Core 32-Bit cores/bus width on the CPU. Understand the operating temperature around -40°C~90°C TJ. The OMAP-L1x series contains it. A ARM926EJ-S processor powers this CPU. SDRAM RAM controllers are used by this CPU. This microprocessor has HPI, I2C, McASP, MMC/SD, SPI, UART interfaces to serve you better. I/O is run at 1.8V 3.3V on this CPU. This is a DIGITAL SIGNAL PROCESSOR, OTHER for the uPs/uCs/Peripheral ICs type. Try searching for variants of the cpu microprocessor with OMAPL137. Total terminations are 256. In the case of a 1.3V voltage supply, the embedded microprocessor should be turned on and run. CPUs operate at 456MHz Hz. For functions of 256 pins, please refer to the datasheets. The external data bus width of this CPU is 16. The CPU microprocessor body is injected with 256 pins. Many applications use this CPU with Surface Mount mounted. There is 1.32V voltage at the CPU core. There are 3 UART (Universal Asynchro3us Receiver/Transmitter) channels on this embedded microprocessor
OMAPL137BZKBD4 Features
ARM926EJ-S Core

OMAPL137BZKBD4 Applications
There are a lot of Texas Instruments
OMAPL137BZKBD4 Microprocessor applications.

Automatic control
Equipment control
Instrument control
Consumer electronics products
Toys
Robots
Radio
Television
Heater/Fan
Calculator

Mount	Surface Mount
Package / Case	256-BGA
Number of Pins	256
Operating Temperature	-40°C~90°C TJ
Packaging	Tray
Series	OMAP-L1x
JESD-609 Code	e1
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	256
Terminal Finish	Tin/Silver/Copper (Sn/Ag/Cu)
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	260
Supply Voltage	1.3V
Terminal Pitch	1mm
Frequency	456MHz
Base Part Number	OMAPL137
Pin Count	256
Voltage	1.32V
uPs/uCs/Peripheral ICs Type	DIGITAL SIGNAL PROCESSOR, OTHER
Core Processor	ARM926EJ-S
Address Bus Width	13
Core Architecture	ARM
Boundary Scan	YES
Low Power Mode	YES
External Data Bus Width	16
Format	FLOATING POINT
Voltage - I/O	1.8V 3.3V
Number of UART Channels	3
Ethernet	10/100Mbps (1)
Number of Cores/Bus Width	1 Core 32-Bit
Graphics Acceleration	No
RAM Controllers	SDRAM
USB	USB 1.1 + PHY (1), USB 2.0 + PHY (1)
Additional Interfaces	HPI, I2C, McASP, MMC/SD, SPI, UART
Co-Processors/DSP	Signal Processing; C674x, System Control; CP15
Barrel Shifter	NO
Internal Bus Architecture	MULTIPLE
Display & Interface Controllers	LCD
Length	17mm
Height Seated (Max)	2.05mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead