SL23EP05SC-1 OverviewIn order to package it as a clock IC, the Tube package is used. A Clock PLL is included with the 8-SOIC (0.154, 3.90mm Width) package. Frequency generator can maintain a maximum temperature of NOT SPECIFIED under reflowing conditions. As a result of this, we can find 8 terminations. Clock generator ics require a voltage of 3.3V. As the Clock PLL's input, Clock is designed to be used in order to generate the clock signal. It is possible to access the full performance of the electrical part by implementing 1 circuits. It provides a maximum frequency of 220MHz. Surface Mount-slots make it easy to mount this electronic component on panels. It would take a maximum supply voltage of 3.6V to operate this time clock generator. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 3V. Clock generator ic works with 2.3V~3.6V. By calculating the test statistics, 0°C~70°C is the appropriate ambient temperature. LVCMOS logic levels are supported by this RF synthesizer. It is a 8-bit IC that is designed for microprocessors specifically. Related electrical parts can be found for the base part number SL23EP05. The clock PLL has 8 pins that are available. The frequency synthesizer features 5 signal outputs to ensure as high a frequency as possible. As a result of this digital clock generator, there is a low timing skew at 0.09 ns max.
SL23EP05SC-1 FeaturesAvailable in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
SL23EP05SC-1 ApplicationsThere are a lot of Silicon Labs
SL23EP05SC-1 Clock Generators applications.
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
Multi-function printers
Media broadcast servers
Test equipment
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 50.008559mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1997 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2A (4 Weeks) |
| Number of Terminations | 8 |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | SL23EP05 |
| Output | LVCMOS |
| Pin Count | 8 |
| Number of Outputs | 5 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 16mA |
| Propagation Delay | 4.4 ns |
| Frequency (Max) | 220MHz |
| Input | Clock |
| Ratio - Input:Output | 1:5 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/Yes |
| Same Edge Skew-Max (tskwd) | 0.09 ns |
| RoHS Status | RoHS Compliant |
SL23EP05SC-1 Datasheet
+8613715157867