CY2308SI-3 OverviewThe Tube method is used for packaging clock ICs. As part of the 16-SOIC (0.154, 3.90mm Width) package, this clock generator is embedded. This clock generator ic can sustain 240 degrees of temperature during reflowing. There are 16 terminations found in this file. To operate this time clock generator, 3.3V voltage should be applied. In this clock generator, LVCMOS, LVTTL is used as the input to the clock. For a full understanding of the electronic part's performance, 1 circuits are implemented. An up to 133.3MHz frequency is provided by this clock-based RF synthesizer. The Surface Mount allows the electrical component to be installed conveniently on the panel. 3.6V would be the maximum supply voltage for this clock generator. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. In terms of supply voltage, RF synthesizer works with 3V~3.6V. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. The frequency synthesizer in this product is compatible with all levels of LVCMOS logic. It has been classified as a Fanout Buffer (Distribution), Zero Delay Buffer electronic part, which means that it is a semiconductor. It is a 16-bit clock PLL designed specifically for microprocessors. It is possible to find its related electronic parts by searching for the base part number CY2308. There are 16 pins on the frequency generators that are available for use. Supply voltage 3.3V is what clock generator can handle. 8 signal outputs are provided for enhancing output frequency as much as possible. Low timing skew is offered by this RF synthesizer at maximum 0.2 ns. Using a frequency of 133MHz allows frequency synthesizer to achieve high efficiencies.
CY2308SI-3 FeaturesAvailable in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2308SI-3 ApplicationsThere are a lot of Cypress Semiconductor Corp
CY2308SI-3 Clock Generators applications.
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | not_compliant |
| Frequency | 133MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2308 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 133.3MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:8 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | No/Yes |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
CY2308SI-3 Datasheet
+8613715157867