The MCIMX283CVM4BR2 is a low-power, high-performance applications processor optimized for the general embedded industrial and consumer markets.

• ARM926EJ-S CPU running at 454 MHz:

  — 16-Kbyte instruction cache and 32-Kbyte data cache

  — Arm-embedded trace macrocell (CoreSight™ ETM9™)

  — Parallel JTAG interface

  
  

• 128 KBytes of integrated low-power on-chip SRAM

  
  

• 128 KBytes of integrated mask-programmable on-chip ROM

  
  

• 1280 bits of on-chip one-time-programmable (OCOTP) ROM

  
  

• 16-bit mobile DDR (mDDR) (1.8 V), DDR2 (1.8 V) and LV-DDR2 (1.5 V), up to 205 MHz DDR clock frequency with voltage overdrive

  
  

• Support for up to eight NAND Flash memory devices with up to 20-bit BCH ECC

  
  

• Four synchronous serial ports (SSP) for SDIO/MMC/MS/SPI: SSP0, SSP1, SSP2, and SSP3. SSP0 and SSP1 can support three modes,1-bit, 4-bit, and 8-bit, whereas SSP2 and SSP3 can support only 1-bit and 4-bit modes.

  
  

• 10/100-Mbps Ethernet MAC compatible with IEEE Std 802.3™:

  — Single 10/100 Ethernet with GMII/RMII or Dual 10/100 Ethernet with RMII interface

  — Supporting IEEE Std 1588™-compatible hardware timestamp

  — Supporting 50-MHz/25-MHz clock output for external Ethernet PHY

  
  

• Two 2.0B protocol-compatible Controller Area Network (CAN) interfaces

  
  

• One USB2.0 OTG device/host controller and PHY

  
  

• One USB2.0 host controller and PHY

  
  

• LCD controller, up to 24-bit RGB (DOTCK) modes and 24-bit system-mode

  
  

• Pixel-processing pipeline (PXP) supports a full path from colour-space conversion, scaling, and alpha-blending to the rotation without intermediate memory access.

  
  

• SPDIF transmitter

  
  

• Dual serial audio interface (SAIF) to support full-duplex transmit and receive operations; each SAIF supports three stereo pairs

  
  

  
  

  
  

  MCIMX283CVM4BR2 Applications

  
  

  • Human-machine interface (HMI) panels: industrial, home

    
    

  • Industrial Drive, PLC, I/O control display, factory robotics display, graphical remote controls

    
    

  • Handheld scanners and printers

    
    

  • Patient-monitoring, portable medical devices

    
    

  • Smart energy meters, energy gateways

    
    

  • Media phones, media gateways

    
    

    Factory Lead Time	15 Weeks
    Package / Case	289-LFBGA
    Surface Mount	YES
    Operating Temperature	-40°C~85°C TA
    Packaging	Tape & Reel (TR)
    Series	i.MX28
    Published	2002
    JESD-609 Code	e1
    Part Status	Active
    Moisture Sensitivity Level (MSL)	3 (168 Hours)
    Number of Terminations	289
    ECCN Code	5A992
    Terminal Finish	Tin/Silver/Copper (Sn/Ag/Cu)
    HTS Code	8542.31.00.01
    Terminal Position	BOTTOM
    Terminal Form	BALL
    Peak Reflow Temperature (Cel)	260
    Terminal Pitch	0.8mm
    Time@Peak Reflow Temperature-Max (s)	40
    Base Part Number	MCIMX283
    JESD-30 Code	S-PBGA-B289
    Supply Voltage-Max (Vsup)	1.55V
    Power Supplies	1.41.8V
    Supply Voltage-Min (Vsup)	1.35V
    Speed	454MHz
    uPs/uCs/Peripheral ICs Type	MICROPROCESSOR, RISC
    Core Processor	ARM926EJ-S
    Clock Frequency	24MHz
    Bit Size	32
    Boundary Scan	YES
    Low Power Mode	YES
    Format	FIXED POINT
    Integrated Cache	YES
    Voltage - I/O	1.8V 3.3V
    Ethernet	10/100Mbps (1)
    Number of Cores/Bus Width	1 Core 32-Bit
    Graphics Acceleration	No
    RAM Controllers	LVDDR, LVDDR2, DDR2
    USB	USB 2.0 + PHY (2)
    Additional Interfaces	I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, SSP, UART
    Co-Processors/DSP	Data; DCP
    Security Features	Boot Security, Cryptography, Hardware ID
    Display & Interface Controllers	Keypad, LCD, Touchscreen
    Length	14mm
    Height Seated (Max)	1.37mm
    RoHS Status	ROHS3 Compliant