PI6C2405A-1LEX Overview
As a clock IC, it uses the Tape & Reel (TR) package. 8-TSSOP (0.173, 4.40mm Width) contains this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. As a result, frequency synthesizers can be found to contain 8 terminations. For this clock generator ic, a voltage of 3.3V is required. This Clock PLL will be fed by TTL as its input. There are 1 circuits implemented in order to achieve full performance from this electronic part. Providing a maximum frequency of 133MHz, this clock-based RF synthesizer is suitable for a variety of applications. The Surface Mount allows this electrical component to be easily installed on the panel. It would be possible to supply this clock PLL with 3.6V of power. For safety reasons, this frequency generator's supply voltage should remain above 3V. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. Based on test statistics, ambient temperature should be set at 0°C~70°C. This is an electronic part that can be classified as a Zero Delay Buffer in this case. PI6C2405 is the base part number for finding related electronic parts. There is a 8 pin that is available on the digital clock generator. The maximum supply voltage that clock generator can handle is 3.3V. At 0.2 ns Max, this analog clock generator exhibits low timing skew. There are 5 pins that are configured to enable high true output on this analog clock generator. The 6C family of parts can be used to find electric parts that are similar to each other.
PI6C2405A-1LEX Features
Available in the 8-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
5 true outputs

PI6C2405A-1LEX Applications
There are a lot of Diodes Incorporated
PI6C2405A-1LEX Clock Generators applications.

Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
Multi-function printers

Factory Lead Time	18 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP (0.173, 4.40mm Width)
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tape & Reel (TR)
Published	2010
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Zero Delay Buffer
Voltage - Supply	3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	PI6C2405
Operating Supply Voltage	3.3V
Supply Voltage-Max (Vsup)	3.6V
Supply Voltage-Min (Vsup)	3V
Number of Circuits	1
Nominal Supply Current	54mA
Frequency (Max)	133MHz
Family	6C
Input	TTL
Ratio - Input:Output	1:5
PLL	Yes
Differential - Input:Output	No/No
Propagation Delay (tpd)	0.3 ns
Same Edge Skew-Max (tskwd)	0.2 ns
Number of True Outputs	5
Length	4.45mm
Width	3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant