SI5368B-C-GQ Overview
Clock ICs are packaged using the Tray method. In the 100-TQFP package, there is an embedded clock generator. There are a total of 100 terminations in this file. A voltage of 3.3V should be applied to this electronic frequency generator. In this case, Clock is designed to be the input of the clock generator. To access the electronic component's full performance, 1 circuits are implemented. The frequency generator has a maximum frequency of 808MHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There are 1.71V~3.63V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. There are several logic levels in CML, LVCMOS, LVDS, LVPECL logic that can be used with this clock generator. It is possible to classify this electronic component as a Clock Multiplier, Jitter Attenuator. An IC that generates clocks specifically for microprocessors, this clock PLL is 100-bits in si100e. The related electrical components for the base part number SI5368 can be found below. A 100 pin is available on the clock PLL. Clock PLL is capable of handling a voltage of 2.5V. It is part of the DSPLL® series of electronic components. The output frequency is magnified as high as possible with 5 signal outputs. A SONET;SDH-axis phase locked loop can be used.
SI5368B-C-GQ Features
Available in the 100-TQFP
Supply voltage of 3.3V
Operating supply voltage of 2.5V

SI5368B-C-GQ Applications
There are a lot of Silicon Labs
SI5368B-C-GQ Clock Generators applications.

Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel

Factory Lead Time	6 Weeks
Mounting Type	Surface Mount
Package / Case	100-TQFP
Surface Mount	YES
Number of Pins	100
Weight	499.688695mg
Operating Temperature	-40°C~85°C
Packaging	Tray
Series	DSPLL®
Published	1997
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	100
Type	Clock Multiplier, Jitter Attenuator
Applications	SONET;SDH
Voltage - Supply	1.71V~3.63V
Terminal Position	QUAD
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	3.3V
Base Part Number	SI5368
Output	CML, LVCMOS, LVDS, LVPECL
Pin Count	100
Number of Outputs	5
Operating Supply Voltage	2.5V
Number of Circuits	1
Frequency (Max)	808MHz
Input	Clock
Ratio - Input:Output	4:5
PLL	Yes
Differential - Input:Output	Yes/Yes
Divider/Multiplier	No/Yes
Radiation Hardening	No
RoHS Status	RoHS Compliant