STUW81300TR OverviewThe Tape & Reel (TR) method is used for packaging clock ICs. As part of the 36-VFQFN Exposed Pad package, this clock generator is embedded. This clock generator ic can sustain NOT SPECIFIED degrees of temperature during reflowing. There are 36 terminations found in this file. To operate this time clock generator, 3.3V voltage should be applied. In this clock generator, LVDS, LVPECL is used as the input to the clock. For a full understanding of the electronic part's performance, 1 circuits are implemented. An up to 16GHz frequency is provided by this clock-based RF synthesizer. The Surface Mount allows the electrical component to be installed conveniently on the panel. 5.4V would be the maximum supply voltage for this clock generator. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. In terms of supply voltage, RF synthesizer works with 3V~5.4V. Test statistics estimate a temperature of -40°C~85°C TA, which should be set as the ambient temperature. It has been classified as a Frequency Synthesizer (RF) electronic part, which means that it is a semiconductor. It is possible to find its related electronic parts by searching for the base part number STUW813.
STUW81300TR FeaturesAvailable in the 36-VFQFN Exposed Pad
Supply voltage of 3.3V
STUW81300TR ApplicationsThere are a lot of STMicroelectronics
STUW81300TR Clock Generators applications.
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 36-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| Type | Frequency Synthesizer (RF) |
| Voltage - Supply | 3V~5.4V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | STUW813 |
| JESD-30 Code | S-XQCC-N36 |
| Supply Voltage-Max (Vsup) | 5.4V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Frequency (Max) | 16GHz |
| Input | LVDS, LVPECL |
| Ratio - Input:Output | 2:2 |
| PLL | Yes with Bypass |
| Differential - Input:Output | Yes/Yes |
| Length | 6mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
STUW81300TR Datasheet
+8613715157867